Bosch BPT-S 3 Manuel De Service page 205

English
Bosch Power Tec GmbH
6.4: Area for gesture control (approach with hand)
Prerequisites
Service switch is in position 1 and AC cabling is in

place
The string inverter is switched on

You have understood the way that the gesture

control works:
– Short gesture: Position your hand approx. 15 cm
in front of the device and then pull your hand back
again immediately
– Long gesture: Place your hand approx. 15 cm in
front of the device and hold your hand in this
position for approx. 5 seconds
The start screen appears:

e.Key or hand operated
With the long gesture, a progress bar is immediately
displayed on the screen.
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
Commissioning | 87