Bosch BPT-S 3 Manuel De Service page 194

76 | Installation
NOTICE
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
Spring (1), chamber (2), wire strands (3)
5.14:
Material damage due to incorrect DC cable
terminations
Incorrect cable terminations can result in damage to
the DC plug/DC socket. If the wire strand can no
longer be seen once the spring has been pressed
down in the terminal area, the cable is not positioned
correctly.
Dismantle the plug/socket and re-terminate the

cable
4. Tighten the screw connection (tightening torque:
2.0 Nm)
(1)
(2)
(3)
English
Bosch Power Tec GmbH