Communication With The String Inverter - Bosch BPT-S 3 Manuel De Service

English
Bosch Power Tec GmbH
3.2.2

Communication with the string inverter

There are 3 different ways that you can communicate
with and activate the string inverter:
e.Key

Gesture control

e.Data

With the e.Key
The first option: Thanks to contactless RFID
technology, the installer is able to set the valid
country parameters in seconds when commissioning
a string inverter.
The installer holds the e.Key, which is about the size
of a credit card, up to the marked field on the string
inverter in order to transfer the data. This rules out
any faults in the settings.
Information on commissioning with the e.Key can be
found in chapter Starting up the string inverter using
the e.Key, p. 85.
With gesture control
The second option: The country-specific parameters
can also be set during commissioning using
contactless gesture control. For this, the installer
sets the language, country and grid standard
manually, one after the other, on the device display:
After a quick gesture, possible parameters are
selected; after a long gesture, the parameters are set.
Information on manual commissioning with gesture
control can be found in chapter Starting up the string
inverter by hand (gesture control), p. 86.
Technical description | 21
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual