Safety; Obligations Of The Installer - Bosch BPT-S 3 Manuel De Service

English
Bosch Power Tec GmbH
2

Safety

2.1

Obligations of the installer

The installer must ensure that
applicable industrial safety regulations,

professional association regulations and technical
regulations are complied with
the specified safety equipment for the photovoltaic

system is fully functional
 any illegible warning and safety decals on the device
are replaced immediately
permissible operating conditions are observed

assembly and operation are carried out under the

conditions specified (Specifications, p. 111)
the transport, assembly, installation,

commissioning, maintenance and disassembly of
the product are only performed by authorised
specialist personnel
the personnel commissioned with performing the

work are able to evaluate their assigned tasks and
recognise possible risks
the manual and, in particular, safety instructions are

read and understood by personnel commissioned
with performing tasks
the manual is available during transportation,

assembly, installation, commissioning, maintenance
and disassembly
the manual is kept in proximity of the product (e.g.

operating manual including appendixes in a folder in
the control cabinet/meter box)
the product is not opened

the product is not used if it is defective

the specifications of the grid operator are observed

Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
Safety | 11