Bosch BPT-S 3 Manuel De Service page 122

4 | Table of Contents
4.3 Transport conditions and storage conditions
4.4 Requirements for the installation location
4.5 Wall mounting or pole mounting
4.5.1 Selecting screws
4.5.2 Mounting the wall bracket and device
5 Installation
5.1 Electrical installation
5.1.1 Connecting the earthing set
5.1.2 Preparing the AC connection
5.1.3 Connecting the network cable (AC cable)
5.1.4 Connecting the solar generator cable (DC cable)
5.1.5 Dismantling the plug
5.1.6 Connecting the string inverter to the Ethernet
6 Commissioning
6.1 Switching on the AC and DC network
6.2 Switching on the device
6.3 Starting up the string inverter using the e.Key
6.4 Starting up the string inverter by hand (gesture control)
6.4.1 Switching from the start screen into the language menu
6.4.2 Setting the language
6.4.3 Set the country
6.4.4 Setting the standard
6.5 Starting up the string inverter using e.Data
6.6 Information on selection of country
7 Maintenance and disassembly
7.1 Preventive maintenance
7.2 Disconnecting the cables from the string inverter
7.2.1 Isolating the string inverter
7.3 Disconnecting the cables
7.4 Taking down the string inverter
7.5 Disposal instructions
8 Help in the event of faults
8.1 The LED concept for fault identification
8.1.1 Faults that cannot be remedied
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
English
41
42
46
47
47
53
60
60
62
65
71
78
80
83
83
84
85
86
88
88
88
89
89
91
93
94
95
95
96
98
99
101
101
102
Bosch Power Tec GmbH