8 | Introduction
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
1.2
Intended use
The Bosch BPT-S series string inverters are designed
exclusively for the conversion of direct current from
solar generators into alternating current for feeding
into the grid. Any other use is not considered
intended use.
The product may only be operated in accordance with
the technical data.
Intended use also includes compliance with the
specifications of this manual.
1.3
Standards and directives
The standards and guidelines that the product fulfils
can be found in the Declaration of Conformity
provided.
1.4
National standards
All national standards must be observed during
installation.
1.5
Foreseeable misuse
Any operation of the device beyond that described
here is considered improper use.
The device must never be operated:
in rooms with a potentially explosive atmosphere
in rooms with a room temperature below -25 °C or
above +60 °C
in rooms which permanently house animals (stalls
with corroding gases)
with defective cables
if the housing is damaged
if components are clearly damaged or defective
if the housing has been opened, drilled or modified
with the ventilation slits covered
English
Bosch Power Tec GmbH