Starting Up The String Inverter By Hand (Gesture Control) - Bosch BPT-S 3 Manuel De Service

86 | Commissioning
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
■
The e.Key is detected (display: e.Key detected). The
data (language, country, grid standard) is transferred
to the device:
When the data is being transferred, white LEDs light

up permanently.
 Once the data has been transferred, the LEDs light
up in a blue circular pattern for three seconds.
The configuration is now complete.
6.4 Starting up the string inverter by
hand (gesture control)
As an alternative to the e.Key or e.Data, once the start
screen has appeared, the string inverter can be
activated using gesture control.
6.3: Area for gesture control
English
Bosch Power Tec GmbH