Technical Details - Sonnenkonig SECCO 1000 Mode D'emploi

Masquer les pouces

Table des Matières

Les langues disponibles

16. Contact an authorised service technician for repair or maintenance of this device.

17. Do not pull, deform or modify the power cord or immerse it in water. Pulling or misuse

of the power cord can result in damage to the device and cause electrical shock.

18. Compliance with national gas regulations shall be observed.

19. Keep ventilation openings clear of any obstruction.

20. Any person involved in working on or accessing a refrigerant circuit should hold a cur-

rent valid certificate from an industry-accredited assessment authority, which author-

ises their competence to handle refrigerants safely in accordance with an assessment

specification recognised by the industry.

21. Servicing shall only be performed as recommended by the manufacturer of the device.

Maintenance and repair requiring the assistance of other skilled personnel shall be

carried out under the supervision of the person competent in the use of flammable

refrigerants.

22. Do not operate or stop the device by inserting or pulling out the power plug, as it may

cause electric shock or fire due to heat generation.

23. Unplug the device if strange sounds, smell, or smoke come from it.

Notes:

•

If any parts are damaged, please contact the dealer or a designated repair shop.

•

In case of any damage, please turn off the air switch, disconnect the power supply and

contact the dealer or a designated repair shop.

•

The power cord must always be firmly grounded.

•

To avoid any hazard resulting from a damaged power cord, please turn off the air

switch and disconnect the power supply. It must be replaced by the dealer or a desig-

nated repair shop.