Short Cord Instructions; Overheat Protection - Kalorik PRO KPRO FT 42777 SS Manuel D'utilisation

SHORT CORD INSTRUCTIONS

A short power supply cord is provided to reduce the hazards resulting
from becoming entangled in, or tripping over a longer cord. Do not use
the appliance with an extension cord.
MAGNETIC CONNECTOR
The cord is equipped with a detachable magnetic connector. The
magnetic connector should be attached directly to the fryer. This
should always be done prior to plugging the cord into the wall outlet.

OVERHEAT PROTECTION

Your Kalorik Pro Deep Fryer is equipped with a thermostat overload
protector, in the event of overheating, the thermal link will
automatically switch the unit off. This can happen if the fryer is not filled
with sufficient oil or if solid frying fat (shortening) is melted directly on the
heating element or in the bowl. In the case of solid fat, the heating
element is unable to radiate the produced heat quickly enough. If the
safety thermal link switches the unit off, please reset the fryer by pushing
the RESET Button located next to the grooves on the front control panel
with a toothpick or similar non-metallic object.
To access the reset button, remove the control panel box and heating
element from appliance housing.
WWW.KALORIK.COM
6
Close up
of reset
button
KPRO FT 42777 – 200605