Kalorik PRO KPRO FT 42777 SS Manuel D'utilisation page 23

TROUBLESHOOTING
Problem
The appliance is
not working
Oil is spilling over
the rim
The appliance is
working but the
POWER indicator
does not light up
The POWER
indicator lights
up but the
appliance does
not heat up
WWW.KALORIK.COM
Cause
Magnetic plug
not properly fitted
Control panel
assembly not
installed correctly
Appliance not
plugged in
Wall outlet not
energized
Malfunctioning
appliance
Overheated oil or
appliance
Overfilled oil
reservoir
Overfilled basket
Damaged POWER
indicator
Preheat time too
short
Malfunctioning
appliance
Solution
Connect the magnetic plug to the
electrical outlet before connecting
the plug to the wall outlet
Install the control panel assembly
correctly by pushing it completely
down so that the safety switch is
activated
Insert the plug into the wall outlet
Check fuses and circuit breaker
Unplug the appliance from the wall
outlet and contact qualified
personnel to check and repair the
appliance
Unplug the appliance from the wall
outlet and allow the appliance / oil
to cool down. Then press the reset
switch closest to the safety switch.
Unplug the appliance from the wall
outlet and allow the appliance / oil
to cool down. Then, remove excess
of oil
Lift out the basket by its handle and
hang it onto the basket hook into
the notch. Remove excess of food
with suitable utensils
Unplug the appliance from the wall
outlet and contact qualified
personnel to check and repair the
appliance
Allow the appliance to preheat for a
longer time
Unplug the appliance from the wall
outlet and contact qualified
personnel to check and repair the
appliance
23
KPRO FT 42777 – 200605