Operation And Technical Data; Signals - schmersal SLC 210 Instructions De Montage

OPERATION AND TECHNICAL DATA

SIGNALS

The LEDs showed on Emitter and Receiver units labels are visualized depending on the
system operation phase. The tables below shows the different signals (ref. Figure 14).
EMITTER SIGNALS
Normal operation
MEANING
Power on. Initial test.
Normal operation. HIGH range.
EMITTER
TEST
Figure 14
RED (2)
ON
OFF
OFF
RECEIVER
(TEST)
GREEN (3)
YELLOW (1)
OFF
ON
ON
ON
OFF
ON
17