Panasonic AW-HE870E Instructions D'opération page 95

Troubleshooting
Symptom
Something is wrong
with the colouring of
the pictures
The pictures are too
light or too dark
Cause and remedial action
p Have the white balance and black balance been adjusted?
­ Adjust the white balance and black balance.
­ The automatic tracking white balance setting (ATW) function may also be
selected.
p Have the colour matrix settings or colour correction settings been
changed?
­ Review the colour matrix settings or colour correction settings.
p When the genlock function is being used by the composite video signal
output
­ Check that the horizontal phase and colour phase have been set correctly.
p When the controller is being used
­ Either set the iris to auto or set it to manual and adjust the iris manually.
p Check the connections and terminations of the video cables.
p Signal attenuation may cause the images to become dark if the video
cables are too long. Connect a commercially available cable compensator.
p Check that the unit and lens have been connected properly.
p Check that the iris selector switch on the lens is set to AUTO.
p Is the designated lens being used?
- 94 (E) -
Reference
pages
P.51 to 53
P.78 to 79,
P.87
P.24,
P.55 to 57
P.37 to 46
—
—
P.17, P.50
P.17