Panasonic AW-HE870E Instructions D'opération page 25

System configuration (Connections)
wConnection with multiple cameras (Supplying the external synchronizing signals)
p Supply a synchronizing signal (BB) to the G/L input connectors of each camera.
p Do not switch off the camera used for supplying the external synchronizing signals.
p Genlock adjustment is needed when supplying the external synchronizing signals. (page 55)
Camera
VIDEO OUT
G/L IN
VIDEO OUT
Camera for external sync
(or special effect generator)
External sync
signal (BB)
INPUT OUTPUT
Video output
To special effect generator or monitoring system
- 24 (E) -
Notes
p Three-value synchronizing signals of
the HD format are not supported.
p When using external synchronization,
only the output signal for the selected
video output format (Format) will be
synchronized (1080i, 720p, or 576i).
When selecting an HD format
(1080i or 720p), neither the VIDEO
OUT signal (composite signal)
nor the Y/C signal output from the
AW-CA50T8 S-Video terminal will
be synchronized with the external
synchronizing signal.
To synchronize the VIDEO OUT
signal (composite signal) or
Video distributor
the Y/C signal output from the
AW-CA50T8 S-Video terminal with
the external synchronizing signal,
use "576i" as the video output
format (selected from the camera
menu).