Wchanging The Component Setting - Panasonic AW-HE870E Instructions D'opération

Changing the settings

wChanging the component setting

A confirmation screen appears when the component setting
is to be changed on the Other Set screen.
1. When the Component setting is changed on the
Other Set screen and the ENTER/AWB switch is
pressed, the "Component" sub menu screen such as the
one shown below is displayed for about 10 seconds.
Component
Do you want to
Set Component(Y/Pb/Pr)?
O.K.
CANCEL
2. If O.K. is selected and the ENTER/AWB switch is
pressed within about 10 seconds after the "Component"
sub menu screen appeared, the setting is changed, a
screen such as the one shown below is displayed, and
operation returns to the main menu.
3. If CANCEL is selected and the ENTER/AWB switch
is pressed after the "Component" sub menu screen
appeared or if O.K. is selected and the ENTER/AWB
switch is not pressed within about 10 seconds after the
"Component" sub menu screen appeared, a screen such
as the one shown below is displayed, operation returns to
the main menu without changing the setting.
- 85 (E) -
Component(Y/Pb/Pr)
Set
Component
unchanged