Panasonic AW-HE870E Instructions D'opération page 57

Adjustment
• When adjusting the phase of SD signals
Observe the waveforms of the external synchronizing
input signal (black burst signal) and video output signal
on a two-channel oscilloscope.
Then match the horizontal phase of both signals by
adjusting them with the horizontal phase control of the
camera menu.
Adjust the horizontal phase
Adjustment by camera menu
Press the DOWN/BAR switch for over 2 seconds to
display the colour bar.
Press the MENU switch for 3 seconds or more to display
the main menu.
Press the UP/ABB switch or the DOWN/BAR switch to
move the cursor to [G/L Set], then press the ENTER/AWB
switch to display the G/L Set sub menu.
Genlock input signal
(black burst)
Video signal
Select [H Phase] on the G/L Set sub menu.
Adjust the horizontal phase with the UP/ABB and
DOWN/BAR switch.
The level of [H Phase] adjustment can be selected with
[H Phase, SC Fine Step].
G/L Set
H Phase
SC Coarse
SC Fine
H Phase,SC Fine Step
Return
- 56 (E) -
MENU switch
ENTER/AWB switch
UP/ABB switch
DOWN/BAR switch
0
90deg
0
1