Panasonic AW-HE870E Instructions D'opération page 94

Troubleshooting
p Video
Symptom
The camera's images
are not displayed or
they are disturbed
p Is the unit connected to the pan-tilt head and controller properly?
­ Refer to the Operating Instructions of the pan-tilt head or the controller.
p Has the power of the connected equipment been turned on?
­ Refer to the Operating Instructions of the pan-tilt head or the controller.
p In the case of a system configuration (using a switcher or other unit) with
which the images are also switched when the camera to be operated is
selected, has the unit — rather than another camera — been selected?
p Has the video output been selected properly?
­ Check the video output format, component output selection, and other
settings.
p Is the camera being used in conditions under which its use is prohibited?
­ Check the precautions for installation and the camera's specifications.
p When the genlock function is being used
­ Check that the genlock sync signals are being input properly.
­ Check that the horizontal phase and colour phase have been set correctly.
Cause and remedial action
- 93 (E) -
Reference
pages
P.25 to 36
—
—
P.65 to 66
P.81 to 82
P.10, P.97
P.24,
P.55 to 57