Manufacturer Liability; Important Precautions - Marcato Regina Mode D'emploi Et D'entretien

HOW TO CHANGE THE DIES
Turn the crank handle counterclockwise by
a few turns. Lift the arc and the top cover as
shown in the image (Fig. 7). Unscrew the lo-
cking ring nut with the wrench supplied (Fig. 8).
Choose the desired die and place it over the
opening, centring it with the worm screw, lining
up the four fins of the die with the respective
slots of the housing tank (Fig. 9).
Tighten the ring nut, holding the die in its
position (Fig. 10). Put the cover back onto the
machine and insert the dough, in small pieces:
different types of pasta are ready! (Fig. 11)
CLEANING THE MACHINE AFTER USE
Turn the crank handle counterclockwise by
a few turns. Lift the arc and the top cover as
shown in Figure 7. Loosen the locking ring nut
with the wrench. Lift the locking fork and the
die-holder (Fig. 12).
Turn the extrusion tank counterclockwise and
remove it from its housing (Fig. 13).
Disassemble all the parts of the machine that
you have used and let them dry for a few hours
(Fig. 14).
Remove dry pasta residues using a brush and a
wooden stick (Fig. 15).
Never wash the machine in the dishwasher!
Reassemble the machine and always put it
away in its box.

IMPORTANT PRECAUTIONS

This appliance can be used by people with re-
duced physical, sensory or mental capabilities,
or lack of experience and knowledge if they
are supervised or have been instructed about
the safe use of the appliance and if they have
understood the dangers involved.
Do not allow children to use the appliance as
a game.
This product was designed for use in home
environments or work areas such as: areas
equipped as kitchens inside stores, offices and
other work areas, hotels and other facilities.
The user manual is an integral part of Regina
and must be kept in its entirety for the entire
life-cycle of the product.
Before using Regina, we recommend carefully
reading this manual which contains instruc-
tions necessary to maintain the functional and
aesthetic qualities of the product unchanged.
Marcato reserves the right to making all chan-
ges necessary to improve its products without
giving advance notice. The illustrations and
descriptions contained in this manual are the-
refore not binding and only have an indicative
value.

MANUFACTURER LIABILITY

Marcato S.r.l. declines any liability for damage
to people or property caused by:
• use of Regina other than the one intended;
• not reading the user manual;
• altering or modifying even a single part of
the product;
• using non original spare parts;
• not following safety warnings.
DISPOSAL OF COMPONENTS
Exhausted or end of life-cycle components
must not be disposed of with home waste.
In compliance with current legislation, applian-
ces that have reached the end of their service
life must be sent to recycling centres. In this
way, it is possible to protect the environment
by recycling materials from old appliances. For
further information, contact local authorities
or those working in recycling centres.
Packaging materials must be sent to suitable
recycling centres.
Dear Customer, we thank you for purchasing an
original Marcato product Made in Italy.
Since 1930, Marcato products have been availa-
ble in all kitchens where the pleasure of eating
healthily and genuinely has been rediscovered.
Authentic "Made in Italy" that distinguishes
design style, detailed quality and durability.
The Regina pasta machine present in this
package makes it possible to prepare different
fresh pasta formats in a few minutes.
For further information: www.marcato.it
5