Chattanooga Fluidotherapy FLU110D Mode D'emploi page 25

SETUP
PREFERENCE MODE DEFAULT PARAMETERS (CONTINUED)
PULSE MODE (Enable/Disable)
Press the "PRESS TO CHANGE MODE"
button until the indicator light is flashing
beside "PULSE TIME".
"EnAb" (enable) or "dISA" (disable)
will display.
Press the "INCREASE" button to set unit to
display "EnAb" or "dISA" as desired.
Press the "PRESS TO CHANGE MODE"
button to save the new setting.
21 21
Fluidotherapy® - Dry Heat Therapy
PREHEAT TIMER MODE (Enable/Disable)
Press the "PRESS TO CHANGE MODE"
button until the indicator light is flashing
beside "PREHEAT TIMER".
"EnAb" (enable) or "dISA" (disable)
will display.
Press the "INCREASE" button to set unit to
display "EnAb" or "dISA" as desired.
Press the "PRESS TO CHANGE MODE"
button to save the new setting.
NOTE:
If Clock is disabled, the "PREHEAT TIMER"
will automatically be disabled.