Back Panel Description - Peavey PC 1600X Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Back Panel
1. Power Supply Input
Use only the 16-16.5 VAC(~) 1000 mA adapter provided. (Peavey part #70900660)
Caution: Use only the 16-16.5 VAC(~) power supply provided with this product. If
the original power supply must be replaced, consult your Peavey dealer or the factory
for the correct replacement. Failure to use the correct power supply could result in
fire, shock hazard, extensive circuit damage, decreased performance, non-operation,
loss of gigs, frustration, cursing, marital problems, and an all-around bad day.
2. Power Switch
3. CV 2 / Footswitch 1 & 2
This input accepts a control voltage foot pedal in addition to a single or dual footswitch. The foot pedal
is programmable per preset and functions the same as a fader. Each footswitch can be assigned to
one of the following functions: up (inc.), down (dec.), Enter, or duplication of a button (1-16). Polarity
is automatically detected at power-up.
4. CV 1
This input accepts a control voltage foot pedal and is programmable to function the same as a fader.
5. MIDI OUT
This transmits all data generated internally. This also acts as a MIDI THRU for all unfiltered messages
received by the PC 1600x.
6. MIDI IN
This accepts commands to be interpreted by the PC 1600x. It also accepts data to be echoed to
the MIDI OUT jack.
1
2
3
8
4
5
6

Publicité

Table des Matières
loading

Table des Matières