Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
associated fader. To restore any fader, simply move the desired fader. To cancel the solo entirely, simply press the
Enter button with the main page displayed.
PROGRAM CHANGE
A button can be assigned to send a program change message each time it is pressed. The MIDI channel can be
set to any MIDI channel, or to the main transmit channel set in the Utility section. The program number can be any
value from 000 to 127. To set these two parameters:
1. From the button function page, select "Program Chng." Next, de-select, then press the up direction button.
The following page will be displayed:
2. Cursor over to the "Chnl" field and set the MIDI channel for the program change message.
Incrementing the channel number above 16 will display "ChOut." When "ChOut" is selected, the
gram change message will be transmitted on the global MIDI channel set in the Utility menu.
3. Cursor over to the "Program" field to set the program number.
NOTE ON/OFF
A button can be assigned to send a note-on message when the button is pressed, and a note-off message when
the button is released. The MIDI channel can be set to any specific channel, or to the main transmit channel set in
the Utility section. The note number can be set to any note from C-1 to G9. The velocity can be set to any specific
value (1-127), determined by the current fader position (Fdr), or determined by incoming MIDI velocity (Rem)
when button remote is used. To set the parameters:
1. From the button function page, select "Note-on/off." Next, de-select then press the up direction button. The
following page will be displayed:
2. Cursor over to the "Chnl" field and set the MIDI channel. Incrementing the channel number above 16 will
display "ChOut", which references the global MIDI channel.
3. Cursor over to the "Note" field to set the note number.
4. Cursor over to the "Vel" field to set the velocity value. Incrementing the velocity value above 127 will display
"Fdr." This option allows the current position of the fader to set the note-on velocity. Pressing the up
button again will display "Rem." This substitutes the incoming MIDI velocity when the button is
activated via a MIDI "note on" message. When pressed locally, "Rem" will act like the "Fdr" setting and
velocity will be determined by fader position.
MIDI STRINGS
A button can be assigned to transmit just about any MIDI message when pressed. These messages are entered
in hexadecimal form or captured via MIDI (see "Learn Mode" on page 24). To define a button MIDI string:
1. From the button function page, select "String." Next, de-select and press the up direction button. The
following page will be displayed:
2. Use the left and right direction buttons to select a byte to be edited. When the cursor is on a digit, the up/
down direction buttons, data wheel, and/or associated fader will edit the digit. Pressing the up button when
between bytes inserts a byte, and pressing the down button between bytes deletes a byte.
STRING PRS/RLS
A button can be assigned to transmit any MIDI messages when pressed and any other MIDI message when
BTN16: Chnl
Program
01
000
BTN16: Chnl Note Vel
01
C4
127
BTN16:
String
F0 00 F7
26
pro-
Publicité
Table des Matières
