Scene Recall; Midi String; Learn Mode - Peavey PC 1600X Mode D'emploi

Table des Matières

Les langues disponibles

SCENE RECALL

A scene can be part of the set-up string. When this condition exists, any time the preset is recalled, the scene

data will be transmitted. Since the memory area for scene storage is fixed and separate from the preset memory,

this function provides an efficient way to transmit data. Previously, this information would have been stored in the

set-up MIDI string, which would have been both time and memory intensive. Note that when a scene is selected

for the set-up scene, its associated preset is indicated in the lower left corner.

1. With parameters de-selected (press EXIT), press the up direction button to access the string on the follow-

ing page:

2. Edit the MIDI string just like a button string. The left/right direction buttons are used to select a specific byte

while the up/down direction buttons and the data wheel are used to edit a digit of the string. Pressing the up

button when between bytes inserts a new byte and pressing the down button deletes a byte. If no bytes are

displayed, no string will be sent.

If a system exclusive message is received while a set-up string is being edited (the cursor must be visible), the PC

1600x will automatically replace the existing set-up string with the system exclusive message received.

SETUP:

Scene

[p:—]

Off

SETUP:

String

Table des Matières