Preset Set-Up String Scene Editing - Peavey PC 1600X Mode D'emploi

2. Use the up/down direction buttons or the data wheel to select a scene. Note: The associated preset is
indicated in parentheses in the lower left corner.
3. Press the Enter button to initialize the scene. The scene number will automatically increment to the next
scene, allowing several scenes to be initialized quickly.
Pressing ENTER will clear any values recorded by a stored scene. After initialization, the preset link will change to
"p:—." Of course, if at first you see [p:—], the scene is already initialized.

PRESET SET-UP STRING SCENE EDITING

A scene can be assigned to each preset. When this condition exists, any time the preset is recalled, the scene
data will be transmitted. Since the memory area for scene storage is fixed and separate from the preset memory,
this function provides an efficient way to transmit data. For more information, see the preset set-up string info on
page 32.
SCENE: INITIALIZE!!!
[p:—] 00 [Enter]
18