Peavey PC 1600X Mode D'emploi page 38

3 byte, Nibs, hi to lo
3 byte, Nibs, lo to hi
4 byte, Nibs, hi to lo
4 byte, Nibs, lo to hi
2 byte, BCD Nibs, hi to lo
2 byte, BCD Nibs, lo to hi
NOTE: If a string has more "pr" bytes than a format requires, the extra "pr" bytes will cause the
parameter to be repeated. This allows the parameter to appear several times in a single
string.
-This format requires three "pr" bytes. The first byte contains
bits 8-11, the second byte contains bits 4-7, and the third byte
contains bits 0-3 of the parameter. This is a rarely used format.
-This format requires three "pr" bytes. The first byte contains
bits 0-3, the second byte contains bits 4-7, and the third byte
contains bits 8-11 of the parameter. This is a rarely used
format.
-This format requires four "pr" bytes. The first byte contains
bits 12-15, the second byte contains bits 8-11, the third byte
contains bits 4-7, and the fourth byte contains bits 0-3 of the
parameter.
-This format requires four "pr" bytes. The first byte contains
bits 0-3, the second byte contains bits 4-7, the third byte
contains bits 8-11, and the fourth byte contains bits 12-15 of
the parameter.
-This format requires two "pr" bytes. The first byte contains
the value of the tens digit parameter while the second byte
contains the ones digit of the parameter. This is sometimes
used for parameters ranging from 0-99 or 0.0-9.9. This is a
rarely used format.
-This format requires two "pr" bytes. The first byte contains
the value of the ones digit parameter while the second byte
contains the tens digit of the parameter. This is sometimes
used for parameters ranging from 0-99 or 0.0-9.9. This is a
rarely used format.
38