SWM SM 500 R E4 2018 Manuel - Utilisation - Entretien page 130

BRAKE PADS REMOVAL
REAR
- Remove clips (1).
- Slide out pin (2).
- Remove pads.
FRONT
- Press on clips (3).
- Slide out pins (4).
- Remove clips (3).
- Remove pads.
WARNING*: Do not work the brake lever or ped-
al while removing the pads.
EN - 52
PADS WEAR
Check brake pad wear.
Respect the service limit "A" indicated in the relative
figures.
If service limit is exceeded, always replace the pads
in pairs.
REAR
A
FRONT
A= 3,5 mm
(0.13 in.)
FRONT
1
2
A
REAR
A= 6,5 mm
(0.25 in.)
3
4