Pairing; Reconnecting; Pairing With Another Device; On / Off Switch - Marmitek BOOMBOOM 55 Guide De L'utilisateur

6

Pairing

1. Make sure your Bluetooth headphones are close to the
BoomBoom 55. The best distance is about 1 metre.
2. Put your Bluetooth headphones in pairing mode (please refer
to your headphones' user manual).
3. Set the BoomBoom 55's switch to ON and press the pairing
button twice. The LED will now flash slowly.
4. The BoomBoom 55 will now be automatically paired with
your headphones. Once the pairing has been established,
the blue LED on the BoomBoom 55 will light up continuously
(this may take a while).
7

Reconnecting

If the BoomBoom 55 or your headphones have been turned off,
the BoomBoom 55 will automatically make a connection once the
BoomBoom 55 and the headphones are turned on again.
8

Pairing with another device

You can easily pair the BoomBoom 55 with another pair of
Bluetooth headphones. Switch off the already paired headset and
perform the above pairing procedure again.
9

On / off switch

Using the ON/OFF switch, you can turn the BoomBoom 55 on or
off.
6 © MARMITEK