Fortress Building Products AL13 HOME Instructions D'installation page 7

Fig. 1
Step 5: Check Mounted Posts
1. Shim post as needed to ensure post is level.
Fig. 1
Step 6: Measure The Panel Opening Length
1. Measure the distance of the panel opening. As shown in Fig. 1.
2. Confirm that the measurements for the top brackets are the
same as the bottom brackets.
Note:
• Measure from the back wall of the bracket to the
back wall of the bracket on other post. As shown in
Fig. 2.
AL
Fig. 2
Fig. 2
Wood Block
Joist / Blocking
HOME TRADITIONAL PANEL INSTALLATION
13
Shim post as needed to
ensure post is level
Deck Board
1/2"
[12.5 ]
mm
7