Fortress Building Products AL13 HOME Instructions D'installation page 26

Fig. 1
Fig. 2
Step 3: Determine Panel Length
1. Check to ensure that all posts are square and straight. Shim
posts as required.
2. Ensure that the Angle Bracket Cups are approximately aligned.
3. With another person's help, measure the distance from the
inside back of one cup to the inside back of the other cup. This
will be the panel length. As shown in Fig. 2.
Fig. 1
26
Assembled Aluminum
Angle Bracket Without Cap
Aluminum Angle Bracket Cap
(To be installed in a later step)
AL HOME TRADITIONAL PANEL INSTALLATION
13