Fortress Building Products AL13 HOME Instructions D'installation page 28

Fig. 1
Step 3: Apply Screws
1. Attach the panel to each of the 4 brackets using the provided
self-drilling screw with a T-25 Bit.
Tip: Pre-drill with a 3/16" [4.5mm] drill bit.
Note:
• It is recommended that all panels are attached with
provided screws on the same side of the bracket
when using a line post. As shown in Fig.1.
• Only one screw is needed to secure the bracket to
the panel.
Fig. 1
Step 4: Attach I-Support To Deck
1. Fasten I-Support to Deck Surface with the supplied Phillips
Head Wood Screw.
Tip: Pre-drill with a 1/16" [1.5mm] drill bit.
28
AL HOME TRADITIONAL PANEL INSTALLATION
13