Fortress Building Products AL13 HOME Instructions D'installation page 16

Fig. 2
Step 2: Flat ATR Line and End
• Reference OTP Round ATR Line and End instructions on page 13.
Step 3: Flat ATR Corner
• Reference OTP Round ATR Corner instructions on page 14.
Step 4: Flat ATR Splice
• Reference OTP Round ATR Splice instructions on page 14.
OTP: CAP RAIL CLIPS & POST BASE COVER
Step 1: Cap Rail Clips
1. Install top rail bracket covers that come with the Cap Rail Clips.
As shown in Fig. 2.
2. Use Cap Rail Clips when installing a drink rail.
Note:
• Cap Rail Clips should be equally spaced over the panel length.
• It is recommended to pre-drill the screw holes.
Fig. 1
16
Double Sided
Tape
Cap Rail Clip
AL HOME TRADITIONAL PANEL INSTALLATION
13