Spypoint TINY-3 Manuel D'utilisation page 6

10
Connector
Lithium battery pack
This SPYPOINT camera can be powered by a rechargeable
lithium battery LIT-09/LIT-C-8 (sold separately, refer to
the section «Options»). This type of battery is less affected
by cold temperatures and lasts up to 3 times more than an
alkaline battery. During the installation of lithium battery,
place the switch inside the battery case to «RECH». Insert
the battery in the case as indicated and insert it inside the
camera (see figure below)
Connector
SPY SPY
Top
Connector
Top
Connector
P P INT INT
TM
TO INSERT THE BATTERY CASE INSIDE
THE CAMERA
Connector
SPY SPY P P
External (12V)
The camera can be powered from an external 12 volt DC
input such as a 12 volt battery (KIT-12V/BATT-12V, sold
separately) or a 12 volt adapter (AD-12V, sold separately).
When using a 12 volt connection, we recommend you to
remove the alkaline batteries to prevent surcharges. During
the installation of 12 volt battery, place the switch inside the
battery case to «ALK» (i.e. alkaline). If combined with a
lithium battery pack, slide the switch to «RECH». To find
the accessories available for the 12 volts, refer to the section
«Options».
TINY-3
Connector
INT INT
TM
11