Spypoint TINY-3 Manuel D'utilisation page 10

18
Select the time interval between two photos
Delay:
(10s/1m/3m/5m/
or videos.
10m/15m/30m)
Additional setting: it is possible to decrease
the delay between detections to 10 seconds
(instead of 1 minute) by using the following
procedure. Note that the battery life will be
affected.
Turn OFF the camera. Press and hold the
«» button and turn the camera ON . «10sec
enabled» appears on the screen meaning
the minimum delay is now 10 seconds. If
this option is used, the 30 minute delay
disappears. To reset the camera to 1 minute
delay, follow the same procedure. «10sec
disabled» appears on the screen (see figure
below)
10SEC ENABLED
10 sec delay
Take up to 6 consecutive shots at each
Multi-shot:
(1/2/3/4/5/6
detection, with a 10 second delay between each
consecutive shots)
photo. This option allows up to 6 pictures
from different angles when the camera is in
«Photo» mode.
10SEC DISABLED
1 min delay
Allow the user to select the recording
Video length:
(10s/30s/60s/90s)
duration when the camera is set in «Video»
mode.
Select a language for the camera's menu.
Language:
(English/Français/
Deutsch/Italiano/
Norsk/Česky/
Suomi/Magyar/
Polski)
Allow the user to choose between three
Sensitivity:
(High/Medium/
different levels of sensitivity: «High»,
Low)
«Medium» or «Low». The camera will only
detect sources of heat in movement. Make
sure to have the least possible objects in front
of the camera during the positioning. This
prevents picture taken by the camera when
oriented towards the sun while an object
moves in front of the camera (e.g. a branch)
Set the date as Month / Day / Year
Date:
Allow the user to choose between a 12 or
Time format:
(12h/24h)
24 hours period time displays on the photos
(eg. 6:00 pm or 18:00)
Set the time as Hour / Minute
Time:
19