External Triggering - Spypoint TINY-3 Manuel D'utilisation

26
1. Beginning and end date of the report
2. Number of photos or videos taken during the day
3. Number of photos or videos taken at night
4. Total of photos or videos taken
5. Current time of the camera
6. Current date of the camera
7. Battery level (1/4 = low, 4/4 = full)
8. Remaining space on the SD card estimated by a number
of photos
9. Used space on the SD card (total number of files, only
includes photos and videos taken by a SPYPOINT camera)

EXTERNAL TRIGGERING

Input which triggers the taking of photos or videos using a
normally open contact. (Example: using a magnetic door
switch connected to an alarm system).
DOWNLOAD TO A COMPUTER
To transfer or view photos and videos on a PC, you must first
turn off the camera and connect the USB cable (supplied)
from the camera to your computer. The computer will
recognize the camera and will install the software itself.
Click on «My Computer» and select «Removable Disk».
Then click «DCIM» and «100DSCIM» to find all your
photos and videos.
Taking the SD card out of the camera and inserting it into
the computer port will achieve the same results. If no SD
slot is built into the computer, a multi-card reader RD25-1
(sold separately, refer to the section «Options»).
VIEW
To view recorded photos or videos on TFT 2.4"
viewing camera screen or on a TV set at home.
• Viewing with the 2.4" screen: When camera is set to
«View», the last recorded photo or video recorded appears
on the screen automatically. Press «» or «» to view next
or previous images.
Press «OK» to view the different options available in «View»
mode.
View Date/Time: To increase the view of the date and time
imprinted on the picture.
To protect the photo or video on the
Protect:
screen.
To erase the photo or the video on the
Erase one:
screen.
To format memory card and to erase all
Format:
protected photos and videos.
To erase all stored photos and videos,
Erase All:
with the exception of protected photos
and videos.
To return to viewing screen.
Exit:
27