Rear View; Bottom View - Spypoint TINY-3 Manuel D'utilisation

8

REAR VIEW

1.
BOTTOM VIEW
8.
7.
BUSY
OK
9. 10.
1. Power button
2. Recording indicator LED
3. «UP» button
4. «BACK» button
2.
5. «OK» button
3.
6. «DOWN» button
4.
5.
7. ALK / RECH (switch for battery)
6.
8. SD card slot
9. USB port
10. 12 volts jack
11. External trigger jack
12. TV OUT
13. Removable battery case
POWER
The battery level is shown in the «Report» mode.
(4/4 = full, 1/4= low) When the battery level shows 2/4,
11.
the camera will continue to take pictures but we strongly
recommend changing the batteries before they are empty.
12.
AA batteries
This camera requires the use of 6 AA batteries (1.5V). The
use of alkaline or lithium batteries is strongly recommended.
13.
During the installation of alkaline batteries, place the switch
inside the battery case to «ALK» (i.e. alkaline). Insert the
batteries in the battery case as indicated and insert it inside
the camera (see figure below). Exact polarity must be
followed. We also recommend the use of new batteries to
ensure maximum performance of your camera.
9