Workplace; Important - Steba CR 36 Mode D'emploi

∙ If a GS-tested 16 A multi-pin extension is used, it may not be
charged with more than 3680 watts due to fire hazard.
∙ Make sure that children do not tease the cable or that a trip
hazard occurs.
∙ The device must always be disconnected from the power supply
if it is not supervised and before assembling, disassembling or
cleaning.
∙ Hygiene: Please always clean the device to avoid bacteria and
mould formation.
Cleaning
Attention! Pull the plug before cleaning and allow
∙
the device to cool down.
∙ Never immerse the unit into water.
∙ Leave the device to cool. Cleaning is easiest when the device is
lukewarm.
∙ Clean with a damp cloth.
∙ Do not use harsh or abrasive cleaners, chemical cleaners or sol-
vents, abrasive scouring pads or metal implements.

Workplace

Important:

Never place this device on or next to hot surfaces (e.g. hot sto-
ves). Only use it on a even, stable and a heat resisting surface. It is
important that no inflammable items are near to the device. Do
not place the device on the edge of the table so that it cannot be
touched by children or fall down when touched.
12