Discharging Nicd/Nimh Battery; Charge-To-Discharge & Discharge-To-Charge Cycle Nimh/Nicd Battery - ANSMANN Racing xMove 2.0 Deluxe Mode D'emploi

15. Discharging NiCd/NiMH Battery

Battery Elapsed
type time
Discharge
current
16. Charge-to-Discharge & Discharge-to-
Charge Cycle NiMH/NiCd Battery
Battery Elapsed
type time
Discharge
or charge
current
14
Discharged Battery
capacity voltage
Discharged Battery
or charged voltage
capacity
Set the discharge current on the left and the final voltage on the
right. The discharge current ranges from 0.1 to 5.0 A and the final
voltage ranges from 0.1 to 30.0 V. To start the process, press the
"Start/Enter" key for more than 3 seconds.
The screen displays the current state of discharge. You can alter the
discharge current by pressing the "Start/Enter" button again. Once
you change the current value, store it by pressing the "Start/Enter"
button again.
To stop discharging press "Batt type/Stop" key once. The audible
sound indicates you the end of process.
Set the sequence on the left and the number of the cycle on the right.
You can use this function for balancing, refreshing and breake-in the
battery. To avoid rising the temperature of the battery, there will be a
brief cool-off period that is already fixed at 'User setting' after each
charge and discharge process. The cycling number ranges from 1 to 5.
To stop the process, press "Batt type/Stop" key once.
You can change the discharge or charge current by pressing
"Start/Enter" once during the process. The audible sound indicates
you the end of process.
At the end of the process, you can see the charged or discharged
electric capacities of the battery at each cyclic process.
By pressing INC ► or ◄ DEC button, the screen shows the result of
each cycle in order.
Instruction Manual