Exterior Of The Unit - ANSMANN Racing xMove 2.0 Deluxe Mode D'emploi

Capacity limit: The charging capacity always calculated by multiple
of the charging current and time. If the charging capacity exceeds the
limit, the process will be terminated automatically when you set the
maximum value.
Temperature limit (*): The temperature of the battery on charging
will rise by its internal chemical reaction. If you set the limit of
temperature the process will be expired forcibly when the limit has
reached.
Processing time limit: You can also restrain the maximum process
time to prevent from any possible defect.
Input power monitor: To protect the car battery using as input
power from being damaged the voltage of it is always monitored. If it
drops below the lower limit the process will be ended automatically.
Automatic cooling fan: The electric cooling fan comes into action
automatically only when the internal temperature of the unit is
raised.

2. Exterior of the Unit

Input power cable
(DC11∼18 V)
Temperature
sensor port
USB port
Battery type/Stop
To select main program
To stop the operation
Balance Charger xMove 2.0 Deluxe
Data store/load
For users convenience it can store maximum 10 data of different
batteries. You can establish the data contains program setting of the
battery to charge or discharge continually. These data can be called
out at any time you need and the process can be executed without
program setting.
Cyclic charging/discharging
Perform 1 to 5 cycles of charge > discharge or discharge > charge
continually for battery refreshing and balancing.
PC based analysis using USB
communication (**)
For technical experts, xMove 2.0 Deluxe offers PC a based program
that can analyse the characteristic of the battery by USB port. It shows
a graph of voltage, current, capacity and temperature curves. It also
shows the individual voltage of each cell in the Lithium battery pack.
LCD screen
(16 chr. x 2 lines)
Start/Enter
To resume or start
the operation
◄ ►
DEC/INC
To select sub program
To alter the value
Individual cell
connector port
3