Index; Operation; Menu Navigation; Nicd / Nimh - ANSMANN Racing xMove Deluxe Manuel D'utilisation

INDEX

Function
DC Input
Charge sockets
Charge sockets
Charge current
Charge end voltage
Discharge current
Discharge end voltage

OPERATION

xMove Deluxe
Connect the
When the charger is connected in the right way you will get an audible signal and the display shows the charge menu. If the display doesn't show anything
the power supply is not connected correctly. If the input voltage is under 11V or over 15V the display shows "INPUT VOLTAGE".Now connect the battery pack
with a suitable cable to the charger (Banana sockets). Please take care to use the right polarity: red = + plus, black = - minus. If the polarity of the battery
is wrong the display shows "WRONG POLARITY". If there is no battery connected and the Button "START" is pushed the display shows "NO BATTERY".
For further adjustments please follow the attached Menu Navigation.

MENU NAVIGATION

After you have connected the
pushing the button "BATT TYPE" once the displayed battery type will start flashing. By pushing "BATT TYPE" again the display changes between the
battery types (NI=NiCd; NH=NiMH; LI=LiIon; LP=LiPo; PB=Lead Acid). Flashing of the battery type display will stop when pushing another button or
after a short time if no button is pushed.
By pushing the button "INC or DEC" the charger will change between "CHARGE", "DISCHARGE" and "CYCLE".
The last used configuration will be saved.
1_manual_xmove_06-12.indd 7 1_manual_xmove_06-12.indd 7
Parameter
11 - 15 V DC
under 11 V or over 15 V
Connected with wrong polarity
After pushing the Button "ENTER / Start / Stop": no battery connected
After pushing the Button "ENTER / Start / Stop": Battery connected
with wrong polarity
NiCd / NiMH / LiIon / LiPo / Lead Acid 0,1 - 5,0 A ± 10%
LiIon 4,1 V / cell ± 1% • LiPo 4,2 V / cell ± 1%
Lead Acid 2,45 V / cell ± 1%
NiCd / NiMH / LiIon / LiPo / Lead acid 0,1 - 5,0 A ± 10%
NiCd/NiMH 0,1 V - 16,8 V adjustable • LiIon 2,7 V / cell ± 10%
LiPo 2,8 V / cell ± 10% • Lead Acid 1,8 V / cell ± 10%
charger with the crocodile clips to a 11-15 V DC supply. Please take care to use the right polarity: red = + plus, black = - minus.
xMove Deluxe
charger the right way you have to chose right battery type by pushing the button "BATT TYPE". By
Prozessfarbe Schwarz Prozessfarbe Schwarz
Display: INPUT VOLTAGE ERROR
Display: NO BATTERY
Display: WRONG POLARITY
Display: Values will be displayed
max. 50 Watt
Display: Values will be displayed
max. 5 Watt
Discharge finished
Action
Normal function
no function
Charge finished
11.01.2007 16:45:38 Uhr 11.01.2007 16:45:38 Uhr
6