Save Data Program - ANSMANN Racing xMove 2.0 Deluxe Mode D'emploi

20. Save Data Program

xMove 2.0 Deluxe has a data storage and load program for your con-
venience. This feature can store up to 10 battery data by number that
represent the individual specification of the batteries you are using.
They can be called back for the process of charging or discharging
without setting up the program again.
Voltage
data
number
16
Capacity Type of
battery
To set up the parameter value in the program, press "Start/Enter"
key to make it blink, then change the value with INC ► or ◄ DEC
key.
The parameter value setting up in this screen does not affect charge
or discharge process. They only represent the specification of the
battery. The following screens will automatically be displayed exactly
matched with the battery type you set up. The example shows the
battery pack of NiMH, 12 cells and 3000 mAh of capacity.
Set up the charge current for manual charge mode, or the current
limit for automatic charge mode. Each mode can be switched by
pressing INC ► and ◄ DEC button at the same time when the current
field is blinking.
Setting up discharge current and final voltage.
Setting up the sequence of charge and discharge, and the cycling
number.
Saving the data.
Instruction Manual