Fast' Charging Lithium Battery - ANSMANN Racing xMove 2.0 Deluxe Mode D'emploi

10. 'FAST' Charging Lithium Battery

The charging current is getting smaller as the process goes to the
near end term of Lithium battery charging. To finish charging process
earlier, this program eliminates certain terms of CV process. Actually,
the charging current will go to 1/5 from the initial value to end the
Number Elapsed
of cells time
Charge
current
Balance Charger xMove 2.0 Deluxe
Supplied Current
capacity voltage of
battery
process while the normal charging goes to 1/10 during CV term. The
charging capacity may be a bit smaller than the normal charging,
but the process time will be reduced.
You can set up the charging current and the voltage of the battery
pack being charged. As you press "Start/Enter" button the voltage
confirmation will be displayed. And then, if you confirm the voltage
and current, press "Start/Enter" button again to start charging.
This shows the present state of 'FAST' charging. To stop charging
arbitary, press "Batt type/Stop" key once.
11