Table des Matières
Publicité
5-3. Tipping
5-4. Installing Extraction Arm
5-5. Connecting Input Power
(460 mm)
OM-239 025 Page 14
18 in.
!
Do not move or operate unit
where it could tip.
!
Do not move unit with extrac-
tion arm extended or unit
may tip.
!
Do not move unit by pulling
on extraction arm or equip-
ment may tip. Use handle on
fume extractor to move unit
!
Do not use this equipment to
support personnel, large
tools, or other material.
.
See extraction arm owner's
manual for installation and ser-
vice information.
1
2
A 115 volt AC, 20 amp individual
branch circuit protected by time
delay (type D) fuses or circuit
breaker is required.
Select 12 AWG three-conductor
extension cord for distances up to
50 ft (15 m) or 10 AWG three-cond-
uctor extension cord for distances
1
up 100 ft (30 m).
2
805 268
115 Volt, 20 Amp AC
Grounded Receptacle
Plug From Unit
805 268-B
Publicité
Table des Matières
