Tipping; Selecting And Preparing Weld Output Cables - Miller SRH-444 Manuel Du Propriétaire

4-7. Tipping
4-8. Selecting And Preparing Weld Output Cables
Page 14
2
3
2 1
10 ft (3 m)
10 ft (3 m)
Do not move or operate unit
where it could tip.
1 Weld Output Cable
Determine total cable length in weld
circuit and maximum welding
amperes. See Section 4-8 to select
proper cable size.
Use shortest cables possible.
Do not use damaged cables.
2 Terminal Lug
Use lugs of proper amperage capacity
and hole size for connecting to work
clamp, electrode holder, and weld
output terminals.
3 Insulated Electrode Holder
5
Install according to manufacturer's
4
instructions.
4 Work Clamp
Install onto work cable.
5 Example: Total Cable Length In
Weld Circuit = 20 ft. (6 m)
Tools Needed:

Tipping 2

Weld Cable1