boso medilife PC2 Mode D'emploi page 33

Data transfer and assessment
Start the boso profile-manager via the icon
"blood pressure measurement"
Choose the part "self monitoring" via a mouse
click on the left part of the monitor
Connect the boso-medilife PC 2 with the enclo-
sed PC-connection cable with the serial port
(COM1 –COM4) of your PC
Through <Setup...><Interface> you choose
the port used for the connection and confirm
with <OK>
A new patient is created via the icon <new> in
the register "Patient" (mandatory are the pati-
entnumber and the name)
Choose the register "Edit" and activate the icon
<transfer measurements...>
Press the start button on your boso-medilife
PC 2 within 6 seconds
After successful data transfer you are asked to
name the year when the last measurment took
place. Please do this and confirm with <OK>
Disconnect the PC-connection cable from the
boso-medilife PC 2.
After successful data transfer delete the me-
mory of the boso-medilife PC 2 by pressing the
SET-button until M
A comprehensive instruction manual for
the boso profile-manager is to be found
on the enclosed CD.
Attention:
No blood pressure measurement is possible
during the data transfer mode.
flashes in the display
33