Advanced Features; Disable Wi-Fi Capability; Re-Enable Wi-Fi Capability; Restart The Soundtouch Pedestal - Bose WAVE SOUNDTOUCH IV Serie Notice D'utilisation

A D VA N C E D F E AT U R E S
Disable Wi-Fi
®
1. Press and hold the pedestal's Control button (8 - 10 seconds).
2. When the Wi-Fi indicator turns off, release the Control button.

Re-enable Wi-Fi capability

Power on the system using the remote control.
Restart the SoundTouch
On the back of the SoundTouch® pedestal, press and hold the
Control button for more than 10 seconds and then release it. After
several seconds the pedestal should turn on again and reconnect
with your network.
Note: Restart does not affect your SoundTouch® presets or your
saved network credentials.
2 2 - E N G L I S H
capability
pedestal
®
Reset the SoundTouch
Factory reset clears all source, volume and network settings from the
system and returns it to original factory settings.
Your SoundTouch® account and presets still exist but are not
associated with the system unless you use the same account to set
up the system again.
1. Make sure that the SoundTouch® pedestal cable is inserted into
the Bose link connector.
2. Disconnect the system from power.
3. Press and hold the Control button on the back of the
SoundTouch® pedestal.
4. While pressing and holding the Control button, reconnect power.
5. Hold the Control button for five seconds.
The system restarts.
6. Open the SoundTouch® app and add the system to your network
(see page 7).
pedestal
®