General Information - Lowenstein Medical prismaCONNECT WM 100 MC Mode D'emploi

2.2 General information

• Use of third-party products may lead to functional failures and
restricted fitness for purpose. Biocompatibility may also be
compromised. Please note that in these cases, any claim under
warranty and liability will be void if neither the accessories nor
original replacement parts recommended in the instructions for
use are used.
• Repairs, servicing, and maintenance should only be carried out
by the manufacturer or by a technician expressly authorized by
the manufacturer.
• Only connect up the devices and modules permitted in
accordance with these instructions for use.
Devices connected up to the prismaCONNECT module's LAN
port must comply with the respective product standard.
Position non-medical devices outside of the patient's
immediate vicinity.
• The operator is responsible for ensuring the compatibility of the
therapy device and all the connected components and
accessories prior to the application with the patient.
Only have modifications to the unit carried out by the
manufacturer or by a technician expressly authorized by the
manufacturer.
• When integrating the WM 100 MC module in an IT network
containing other devices, the operator must verify that this
does not pose any risks to patients, users, or third parties
(IEC 80001-1).
• Please observe the chapter on hygienic preparation in order to
avoid infection or bacterial contamination (see chapter
"Hygienic preparation").
• Also observe the respective instructions for use for the therapy
device, the components, and the accessories.
prismaCONNECT
2 Safety
EN 29