Medion MD 41350 Mode D'emploi page 73

Controls and connections for the TFT monitor
When you have set up all of the connections for the
DVD player, connect the TFT monitor as follows:
Left-hand side of the monitor
GB
Insert the AV cable's 12 V plug in the DC 12 V socket
on the monitor. Insert the other end of the cable in
the DC 12 V OUTPUT socket on the DVD player.
If you prefer to operate the controls via the monitor
connect the monitor and DVD player using the
remote control signal transmission cable. The
monitor's IR sensor will now transmit remote control
signals to the DVD player.
GB-19