Chapter 4: Connecting The Wireless-G Broadband Router With Rangebooster; Hardware Installation For Connection To Your Broadband Modem; Figure 4-1: Connecting Your Internet Connection - Cisco Systems Linksys WRT54GR Mode D'emploi

Wireless-G Broadband Router with RangeBooster
Chapter 4: Connecting the Wireless-G Broadband Router
with RangeBooster

Hardware Installation for Connection to Your Broadband Modem

1. Power down your network devices.
2. Locate an optimum location for the Router. The best place for the Router is usually at the center of your
wireless network, with line of sight to all of your mobile stations.
3. Fix the direction of the antennas. Place the antennas at a 45 degree angle for best performance.
4. Connect a standard Ethernet network cable to the Router's Internet port. Then, connect the other end of the
Ethernet cable to your cable or DSL broadband modem.

Figure 4-1: Connecting Your Internet Connection

Chapter 4: Connecting the Wireless-G Broadband Router with RangeBooster

Hardware Installation for Connection to Your Broadband Modem
8