The Administration Tab - Factory Defaults; The Administration Tab - Firmware Upgrade; Figure 5-45: Administration Tab - Factory Defaults; Figure 5-46: Administration Tab - Firmware Upgrade - Cisco Systems Linksys WRT54GR Mode D'emploi

Wireless-G Broadband Router with RangeBooster

The Administration Tab - Factory Defaults

Click the Restore Factory Defaults button to reset all configuration settings to their default values. Any settings
you have saved will be lost when the default settings are restored. This feature is disabled by default.

The Administration Tab - Firmware Upgrade

Note: The Router will lose all of the settings you have customized. Before you upgrade its firmware,
write down all of your custom settings. After you upgrade its firmware, you will have to re-enter all
of your configuration settings.
Do not upgrade your firmware unless you are experiencing problems with the Router. For more information about
upgrading firmware, refer to "Appendix C: Upgrading Firmware".
Before upgrading the firmware, download the Router's firmware upgrade file from the Linksys website,
www.linksys.com/international. Then extract the file.
Please select a file to upgrade. In the field provided, enter the name of the extracted firmware upgrade file, or
click the Browse button to find this file.
Start to Upgrade. After you have selected the appropriate file, click this button, and follow the on-screen
instructions.
Help information is shown on the right-hand side of the screen.
Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster
The Administration Tab - Factory Defaults

Figure 5-45: Administration Tab - Factory Defaults

Figure 5-46: Administration Tab - Firmware Upgrade

35