Chapter 4: Connecting The Wireless-G Range Expander; Overview; Connection To A Wired Network For Setup; Figure 4-1: Connecting The Ethernet Network Cable - Cisco Systems Linksys Wireless-G WRE54G Guide De L'utilisateur

Wireless-G Range Expander

Chapter 4: Connecting the Wireless-G Range Expander

Overview

You should connect the Range Expander to your wired network for setup. Proceed to the "Connection to a Wired
Network for Setup" section.
If you want to configure the Range Expander using your wireless network, proceed to the "Connection to a
Wireless Network for Setup" section if you have security enabled. Proceed to the "Connection for Auto
Configuration" section if you have security disabled.
NOTE: The Auto configuration button can be used to set up the Range Expander if you have security NOTE: The Auto configuration button can be used to set up the Range Expander if you have security
disabled on your wireless network. Proceed to the "Connection for Auto Configuration" section. disabled on your wireless network. Proceed to the "Connection for Auto Configuration" section.
NOTE TO ADVANCED USERS:If you want to use the Web-based Utility to configure the Range
Expander, then connect the Range Expander to your network. Open the web browser of a
networked computer, and enter the Range Expander's IP address, 192.168.1.240. Configure
your network's SSID, channel, and security settings on the Basic Setup screen. For more
information, proceed to "Chapter 6: Configuring the Wireless-G Range Expander."

Connection to a Wired Network for Setup

1. Flip up the lid covering the Ethernet network port on the Range Expander's front panel.
2. Connect the included Ethernet network cable to the Ethernet network port of the Range Expander.
Connect the other end of the network cable to an Ethernet network port on your network router.
3. Connect the appropriate power plate and connect it to a power outlet, preferably a surge protector.
Proceed to "Chapter 5: Setting Up the Wireless-G Range Expander."
Chapter 4: Connecting the Wireless-G Range Expander
Overview
Figure 4-1: Connecting the
Ethernet Network Cable
Figure 4-2: Using the Power Plate
with Cord
Figure 4-3: Using the
Power Plate with Plug
NOTE: Not for use
with UK-style
power plugs.
8