Figure 5-25: Wireless Tab - Wireless Security (Psk2 + Radius); Figure 5-26: Wireless Tab - Wireless Security (Radius) - Cisco Systems Linksys WRT54GR Mode D'emploi

Wireless-G Broadband Router with RangeBooster
PSK2 + RADIUS. This option features a PSK2 used in coordination with a RADIUS server. (This should only be
used when a RADIUS server is connected to the Router.) AES is the type of encryption method used. Enter the
RADIUS server's IP address and port number, along with the shared secret (authentication key) shared by the
Router and the server. Last, enter the Key Renewal period, which instructs the Router how often it should change
the encryption keys.
Figure 5-25: Wireless Tab - Wireless Security
(PSK2 + RADIUS)
RADIUS. This option features WEP used in coordination with a RADIUS server. (This should only be used when a
RADIUS server is connected to the Router.) First, enter the RADIUS server's IP Address and port number, along
with a shared secret (authentic key) shared between the Router and the server. Then, select a level of WEP
encryption, 40/64 bits 10 hex digits or 104/128 bits 26 hex digits and either generate a WEP key using the
Passphrase or enter the WEP key manually, and lastly, select a Default Transmit Key (choose which Key to use).
Change these settings as described here and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes.

Figure 5-26: Wireless Tab - Wireless Security (RADIUS)

Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster 21
The Wireless Tab - Wireless Security