The Front Panel; Figure 3-2: The Router's Front Panel - Cisco Systems Linksys WRT54GR Mode D'emploi

Wireless-G Broadband Router with RangeBooster

The Front Panel

The Router's LEDs are located on the front panel.
Ethernet 1, 2, 3, 4 Green. These numbered LEDs, corresponding with the numbered ports on the Router's back
panel, serve two purposes. If the LED is continuously lit, the Router is successfully
connected to a device through that port. A flashing LED indicates network activity over that
port.
DMZ Green. The DMZ LED indicates when the DMZ function is being used. This LED will remain
lit as long as DMZ is enabled.
Internet Green. The Internet LED lights up when there is a connection made through the Internet
port.
Wireless Green. The Wireless LED lights up whenever there is a successful wireless connection. If
the LED is flashing, the Router is actively sending or receiving data over the network.
Power Green. The Power LED lights up and will stay on while the Router is powered on.
Chapter 3: Getting to Know the Wireless-G Broadband Router with RangeBooster
The Front Panel

Figure 3-2: The Router's Front Panel

7